Universal alarm for commercial vehicles • XR5VUL

The Beeper XR5VUL universal alarm is a specialised alarm for the protection of commercial vehicles. It is a simple and efficient system. The communication between the different elements is done by radio transmission RFID (Radio Frequency Identification), which allows the installation of a complete system with only 2 wires. 

The Beeper XR5VUL is the first automotive system to allow FULL COMPATIBILITY with multiplexed systems. The only connection required for its operation is the power supply for the siren, which can be taken directly from the battery or from the passenger compartment.

Composition of the kit 

A = Central siren with integrated shock sensor

B = Infrasonic sensor

C = Hyper frequency sensor

D = Magnetic sensor

E = Radio contactor

F = Bonnet switch

G = 2 mono-directional remote controls

Compatibility

Most European vehicles produced after 2001 incorporate a multiplexed electrical network (CANBUS, VAN, etc.).. This means that a single cable of the electrical network can contain multiple information thanks to a specific coding of the data in transit. The BEEPER XRAY XR5 is a 100% universal kit, which means that it can be easily installed on all types of multiplexed vehicles as well as on all older vehicles (pre-2001).

Easy installation

Connecting the BEEPER XRAY XR5 car alarm is simple and takes only 15 minutes. Simply connect the two wires of the siren to your vehicle's battery and place the air pressure sensor in the cigarette lighter.

Innovation

The technology developed for the Beeper XRAY XR5VUL is Radio Frequency IDentification (RFID) which allows for wireless transmission of data between the different elements of the system and automatic recognition between them. In the vicinity of the vehicle, the remote control will be automatically recognised by the central, so there is no need to press the button on the remote control. The system will activate and deactivate itself within a radius of 10 m.

Main functions

  Siren and central 2 in 1

- Central with integrated 8-level adjustable shock sensor, allowing the various alarm modules to be connected. 
- 118db siren
- 2 wires to be connected : 
  red wire (+) 12V permanent battery
  black wire (-) battery ground

  2 Remote controls

- Mono directional function 
- Automatic activation/deactivation function (hands-free access) 
- 2 CR 2032 flat batteries (supplied) per remote control
- Alarm memory :
On deactivation, if the siren beeps 4 times, the system has registered that the system has been triggered in advance. 

Infrasonic sensor 

Allows the detection of air pressure changes in the vehicle. It is installed in the front cabin of your commercial vehicle, in the cigarette lighter.

- Wireless connection between the central and the sensor
- Rechargeable on cigarette lighter
- Autonomy of 6 days
- Flashing of a red diode 
- Possibility to activate and deactivate the air pressure sensor 
- It is possible to adjust the sensitivity of the sensor
- This sensor can only be present once on the central

Hyper frequency sensor 

The hyper frequency sensor is particularly suitable for the protection of large open or closed volumes, such as the storage space of your commercial vehicle. It detects movement within a defined perimeter, e.g. an arm entering the field will be detected.
The sensor should be positioned in the centre of the rear cabin. The hyperfrequency signal is emitted as a half-sphere from the sensor.
Note that it is possible to adjust the sensitivity of the sensor with the potentiometer.

Magnetic contactor 

Wireless connection between the central and the sensor. This element is particularly useful for securing the sliding door and rear doors of your commercial vehicle.

- 1 magnetic contactor supplied with the alarm 
- The 2 parts are connected by a magnet which generates a detection as soon as they are separated. 
- A flat battery CR 2032 (supplied) 
- The autonomy is about 24 to 36 months

Radio contact + cover 

The radio contact can be used alone or in addition to the bonnet switch.

Radio contactor :
- The radio contactor, when used alone, allows the vehicle to be protected by the ceiling light. The sensor connects to the lighting of a ceiling light or to any electrical source allowing the detection of an opening and therefore allows the siren to be triggered.

Bonnet switch :
- The bonnet switch is used exclusively in addition to the radio contact. It allows the siren to be protected. 
- This sensor can only be present once on the central.

The XR5VUL alarm is of course a complete kit, delivered with all the necessary accessories for the assembly, as well as a simple and clear assembly instructions.

Note : 

For additional protection you can add additional sensors : 

- XR5-PIR01 Infrared motion sensor Here